海底硬岩钻探的现状与前景分析          下载免费PDF全文

刘协鲁  陈云龙  阮海龙  蔡家品  赵义  刘智键  梁涛  邓都都  刘广治 《探矿工程》2022,49(1):72-78

海底硬岩是世界大洋钻探实现“莫霍钻”目标必然钻遇的地层。世界大洋钻探实施的航次中已多次钻遇海底硬岩,不仅采获了岩心样品,也在钻进施工中发现了诸多问题。本文搜集了近年来世界大洋钻探实施的309、312、335、360和384等有关海底硬岩钻探航次的资料,在对航次情况简要介绍的基础上,重点阐述了目前海底硬岩钻探在钻头、井壁稳定以及取心工具等方面遇到的挑战以及采取的应对措施,并对今后海底硬岩钻探的发展进行了展望。  相似文献   

Prediction of hydrodynamic forces on submarine pipelines using an improved Wake II Model     

Iwan R. Soedigdo  K.F. Lambrakos  Billy L. Edge 《Ocean Engineering》1998,26(5):431-462

The hydrodynamic force model for prediction of forces on submarine pipelines as described includes flow history effect (wake effects) and time dependence in the force coefficients. The wake velocity correction is derived by using a closed-form solution to the linearized Navier–Stokes equations for oscillatory flow. This is achieved by assuming that the eddy viscosity in the wake is only time dependent and of a harmonic sinusoidal form. The forces predicted by the new Wake (Wake II) Model have been compared to Exxon Production Research Company Wake Model in terms of time histories (force shape) and magnitudes of peak forces. Overall, the model predictions by the Wake II Model are satisfactory and represent a substantial improvement over the predictions of the conventional models. The conventional force models representing adaptations of Morison's equation with ambient velocity and constant coefficients give predictions that are in poor agreement with the measurements especially for the lift force component. The Wake II Force Model can be used for submarine pipeline on-bottom stability design calculations for regular waves with various pipe diameters.  相似文献   

海底隧道防排水技术浅析——以厦门翔安海底隧道为例     

许文锋 《台湾海峡》2009,28(1):102-106

由于海底隧道的特殊性，其防排水技术与一般陆地隧道有着显著区别，本文介绍了厦门翔安海底隧道的防排水方案设计情况，对方案实施效果进行了评估．得出了海底隧道防排水应结合围岩与支护的自防水功能采取以堵为主的原则，并针对海底隧道防排水方案实施中的问题，提出了对初期支护背后注浆是重点，改进注浆材料等建议．从而论述了防排水技术是海底隧道工程建设的核心问题．  相似文献   

基于ArcEngine小区三维排水管网验收系统设计与实现     

王俊雷  赵启龙  李会娟  王娜 《地理空间信息》2012,(2):101-103

分析了小区地下排水管网的设计、建设、验收的自动检测系统的必要性,介绍了利用ArcEngine开发GIS软件的优点,实现了小区地下排水管网的三维建模及其自动检测系统,即小区三维排水管网的验收系统;重点讨论了地下排水管网的三维建模方法,解决了以往三维场景中的三维模型只能显示、不能查询编辑的问题。  相似文献   

椭圆度-凹坑双缺陷海底管道局部屈曲特性研究   总被引：2，自引：1，他引：1  

薛陆丰  余杨  余建星  徐立新  高静坤  刘浩 《海洋工程》2018,36(2):92-99

海底管道在制造、埋设以及使用过程中极易产生椭圆度-凹坑双缺陷,双缺陷影响管道局部屈曲,对含椭圆度-凹坑双缺陷海底管道的局部屈曲特性研究十分必要。现行规范中采用等效椭圆度对含椭圆度-凹坑海底管道进行评估,该方法无法准确评估不同缺陷形式的屈曲特性。采用形状系数对含椭圆度-凹坑双缺陷的海底管道进行评估,运用有限元软件ABAQUS进行数值模拟,并进行试验验证。在此基础上对含有不同凹坑深度、不同椭圆度的海底管道进行局部屈曲的数值模拟,计算不同形状椭圆度、含有不同凹坑深度海底管道的形状系数,对其进行敏感性分析。计算结果表明:形状系数对海底管道椭圆度、凹坑深度、径厚比敏感性较强;对凹坑宽度敏感性较弱。  相似文献   

后挖沟深度对深海海底管道屈曲影响数值分析     

李修波  刘可安  王华昆  王鸿飞 《海洋工程》2020,38(3):152-160

鉴于海底管道的服役水深越来越深,主要采用犁式挖沟机对预铺设于海床之上的海底管道采取后挖沟的方式将海底管道埋设于海床之下,以保护其免受不必要的损伤。针对后挖沟深度H是海底挖沟机的重要设计参数,也是影响管道悬跨的重要因素的问题,对SMD(UK)犁式挖沟机展开参数优化,确保作业过程中悬跨段管道在外部静水压力作用下,海底管道不会发生屈曲破坏。采用ABAQUS软件,分别建立了作业前和作业中两种工况下的悬跨模型,分析机械手对接触部分管道的损伤,结果显示,作业中的机械手对悬跨管道的损伤更大;同时,建立了作业中不同管径下,后挖沟深度对管道损伤的安全裕量关系曲线。进一步,结合作业中不同挖沟深度下的管跨段屈曲数值模型,对处于外部静水压力作用下的悬跨管的屈曲失效展开分析,结果显示,随着后挖沟深度的加大,不同管径下的悬跨段管道局部出现塑性压溃的临界压力值不断降低;管道外径的增大,降低了同一后挖沟深度下发生屈曲失效的压力值。最后,在后挖沟深度与外部静水压力组成的区域内,建立屈曲失效临界关系曲线,并划分出工作区和压溃区,为深海管道后挖沟埋管的施工提供工程参考。  相似文献   

深海滑坡灾害的物质点法模拟     

董友扣  马家杰  王栋  RANDOLPH Mark 《海洋工程》2019,37(5):141-147

深海滑坡可以沿着斜坡搬运大量沉积物,是危害巨大的海洋地质灾害之一。评估深海滑坡的流滑机制并量化分析其对海底结构物的冲击对海洋资源的开发利用至关重要。采用物质点法对滑坡的滑动特性进行了总应力分析。设计了三组不同的土体、海床参数,展现了三种不同的滑动形态:延展、块体和扩张。随后复现了流滑体对部分暴露管线的冲击过程,并对冲击力的稳定值进行了分析,分析中考虑了流滑体的惯性、抗剪强度和静压力的影响。研究表明,物质点法能够用于模拟深海滑坡的流滑过程及其对海底结构物的冲击,可以为海洋工程中的实际设计工作提供服务。  相似文献   

Current-induced scour beneath initially elevated subsea pipelines     

《Applied Ocean Research》2019

When a subsea pipeline is laid on an uneven seabed, certain sections may have an initial elevation with respect to the far-field seabed, e_o, and thus potentially affecting the on-bottom stability of the pipeline. This paper focuses on quantifying the effects of the upstream dimensionless seabed shear stress, θ_∞, and Reynolds number, Re, on: (1) the maximum dimensionless seabed shear stress beneath the pipe, θ_max, to be compared to the critical shear stress in order to determine whether scour would occur and progress towards an equilibrium state; and, (2) the dimensionless equilibrium scour depth beneath the pipe, S_eq/D. Using a 2-D Reynolds averaged Navier-Stokes (RANS) approach along with the k-ω Shear Stress Transport (SST) turbulence model, a parametric study involving 243 computational fluid dynamics (CFD) simulations was conducted. The simulation results were used to develop a closed-form equation for the prediction of θ_max. Subsequently, experimental measurements of S_eq/D have been compiled from published literature, to develop a new closed-form equation for the prediction of S_eq/D with a high correlation to the experimental data. In summary, we present two closed-form equations for the prediction of θ_max and S_eq/D for pipelines with an initial e_o/D, which are applicable for both clear-water and live-bed conditions. The effects of θ_∞ and Re have been included, albeit Re having a small influence as compared to the other parameters.  相似文献   

智慧城市云平台中地下管线系统模块设计     

赵舒扬  赵东辉 《测绘与空间地理信息》2017,(8)

随着互联网技术支撑的实时以及动态的大数据时代的来临,智慧城市的发展面临新的问题。城市智慧管线系统是智慧城市不可或缺的重要组成部分,其系统在传统平台的网络硬件支撑、数据支撑、服务支撑、应用及用户各个逻辑层面上,必须有新的技术手段应用和对传统技术的升级及替代。  相似文献   

Effect of geometric and material discontinuities on the reeling of pipelines     

《Applied Ocean Research》2017

The winding and unwinding of a pipeline onto a large diameter reel as practiced in the reeling installation method, induces bending strains of 1–3% followed by straightening, and reverse bending. The operator must ensure that such plastic deformations are sustained free of local buckling or rupture in the line. Such failures are for example precipitated by pipeline discontinuities in wall thickness and yield stress as they act as stress risers, lead to localized deformations severe enough to result in local buckling. The effect of such discontinuities is studied using a large-scale nonlinear finite element model that simulates the reeling/unreeling of a pipeline. Nonlinear kinematic hardening is used to capture the elasto-plastic behavior of the material imposed by the bending/reverse bending history. Discontinuities in wall thickness and yield stress are shown to result in sharp local changes in curvature that extend over 3–4 pipe diameters accompanied by severe local straining and ovalization. The extent of the disturbance is governed by the bending strain imposed by the ratio of pipe to reel diameter. It can be reduced by an increase in the applied tension but at the expense of additional ovalization of the pipeline. It can also be reduced by increasing the pipe wall thickness but with the consequent increase in costs. A parametric study of the effect of such discontinuities demonstrates that for some combinations of process parameters, the disturbance can lead to local buckling either during winding or unwinding. It is concluded that a modeling framework such as the one presented should be used to generate a design protocol for reel-installed pipelines.  相似文献